Hiblow WG-Series Air Pump

Hiblow hasmanufactured air pumps for the pond and aquatic industries for over 30 years. They know that reliability, energy efficiency, and low sound levels are all extremely important for your aquatic systems. Their pumps provide aeration and water circulation for water gardens, koi ponds, backyard/ farm ponds, aquaculture, hydroponics, and aquaponics.

• Oil-free operation eliminates danger of contamination in your pond!
• Linear diaphragm design for quick, inexpensive repair of worn pumps (Pumps can be rebuilt a couple of times for extended use!)
• Includes pressure tap location for external alarm sensor
• These 120vAc / 60Hz pumps are UL Listed
• Outside diameter of outlet is 18mm (0.71″)
• Includes arubber elbow to adapt to 3/8″ ID tubing
• 1 Year Manufacturer Warranty

Benefits of subsurface aeration:

• Helps keep the water clear of algae and other organic matter
• Promotes healthy oxygen levels for fish growth and sustainability
• Helps evenly distribute oxygen and water temperature
• Creates a hole in the ice in the winter which allows toxic gases to release preventing fish kill
• Need help calculating the proper air pump? Check out our calculators.

Some Things to Consider

• HIBLOW recommendations are general guidelines for selecting a pump.

• For depths greater than 6, you may want to consider bumping up to the next size pump to offset the loss of air from the increase in pressure.

• If you have an odd or kidney shaped pond, it may be advisable to contact a pond distributor for guidance as you may need multiple diffusers to properly mix and aerate the whole pond.

• If breeding specific types of fish, we would recommend consulting with an aquatic specialist before selecting a pump as certain breeds require different levels of oxygen.

Aeration System Recommendations for Best Results

• Keep the pump covered and, in the shade, and allow for enough air circulation around the pump.
• 1/2 ID tubing/ weighted line is suggested for distances between 50-100 and 3/4 ID beyond 100.
• You may consider using a Y connection instead of a T connection when splitting the line for multiple diffusers to reduce backpressure.
• Use medium bubble diffusers to limit backpressure and increase air flow. Place each at the same depth or use ball valves to even out the air flow/ pressure.

Replacement Diaphragm Kits

Spec Sheets

HP-20 and HP-40 Spec Sheets

HP-60 and HP-80 Spec Sheets

HP-100 and HP-120 Spec Sheets

HP-150 and HP-200 Spec Sheets