How the nexusfilter works:1. Water from the pond enters the nexus via the inlet into the inner chamber which works as a vortex allowing larger solids to settle out.2. Water then passes through the grills in the stainless steel "Eazy" filter, where the fine
How the nexusfilter works:
1. Water from the pond enters the nexus via the inlet into the inner chamber which works as a vortex allowing larger solids to settle out.
2. Water then passes through the grills in the stainless steel “Eazy” filter, where the finer particles are removed at the mechanical stage of filtration, thanks to the static bed of their award winning K1 Micro
3. The mechanically clean water then passes to the outside chamber of the nexus where the K1 Media moving bed is located for biological treatment prior to being returned to the pond.
4. At this stage, biological breakdown occurs through different strains of bacteria and filter feeders living on the protected surface area of each piece of the K1 media. These bacteria convert Ammonia and Nitrite into less harmful Nitrate.
5. Water then passes through the exit gril into the outlet, returning back to the pond.
Two Models:nexus220Max Pond Size: 4,800 US gallonsMax Flow Rate: 2,640 US gallons/hrVolume of water in nexus: 135 US gallonsAmount of K1 Micro supplied in EAZY filter: 18 Liters of K1 Micro (Inner Chamber)Amount of K+ Media supplied in in Bio Chamber: 50 Liters of K+ Media (Outer Chamber) – PLEASE NOTE: The amount of media in the outer chamber can be increasedup to 150 Liters of K+ TOTAL to the outer chamber for heavy fish loads. On a new setup, if the media is increased, the media will take more time to mature as there is more surface area for the bacteria to colonize.
nexus320Max Pond Size: 9,000 US gallonsMax Flow Rate: 3,431 US gallons/hrVolume of water in nexus: 222 US gallonsAmount of K1 Micro supplied in EAZY filter: 20 Liters of K1 Micro(Inner Chamber)Amount of K+ Media supplied in Bio Chamber: 100 Liters of K+ Media(Outer Chamber) – PLEASE NOTE: The amount of media in the outer chamber can be increasedup to300Liters of K+ TOTAL to the outer chamber for heavy fish loads. On a new setup, if the media is increased, the media will take more time to mature as there is more surface area for the bacteria to colonize.Max capacity for K+ Media: 300 Liters of K+ MediaGravity Fed InstallBy this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.Pump-Fed InstallBy this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
The new design of the Eazy enables the Nexus to capture solids more effectively than before. K1 Micro is used inside the re-designed Eazy helping to deliver improved capture of fine particles, delivering unrivalled mechanical filtration.
The new Eazy features an improved pattern of slots in the stainless steel body which makes the filter more efficient. Water can pass through the Eazy through all sides andfrom below, much more effectively than before. This feature combined with the use of K1 Micro makes for improved flow rates through the entire mechanical filter stage.
The Nexus 320 and 220 filter systems use two types of filter media to deliver optimum levels of clarity in your pond. K1 Micro is used in the Eazy to improve mechanical filtration while the tried and tested K1 Media is used in the moving bed outer chamber, delivering the biological filtration.
A key feature of all Nexus filtration systems is the sheer ease of maintenance. This still remains the case with the new Nexus 220 and 320 systems. The Eazy is simply cleaned by using a combination of the cleaning pipe, air valves and ball valves fitted to the Nexus, meaning you dont need to get your hands dirty. The clear lid fitted to the Eazy also makes it easy to visual inspect the K1 Micro media.
Inside the centre mechanical stage of the Nexus, thereis a much larger area for solid waste to be captured andto settle. This area can then be cleaned even easier than before ensuring the filter does not clog up with unnecessary amounts of waste.
All Eazy filters used in the Nexus 320 / 220 series can be removed if needed with the K1 Micro in place. This added feature is ideal when undertaking further maintenance.
One of the factors that can have a significant influence on the general parameters of our ponds is turn over rate. This is the time that it takes for the total volume of the pond to pass through the filter system once. We recommend that for ideal performance a turn over rate of every 2 to 3 hours is found to be best.
Air Pump Requirements
You can increase the biological capacity of your Nexus by adding additional K1 Media into the outer chamber up to the maximum capacity. You will however need to ensure that you have the correct size of air pump to enable the K1 Media to move sufficiently. See table below.
PLEASE NOTE: THIS IS A FREIGHT ITEM. A VALID CONTACT NUMBER IS NEEDED TO SCHEDULE THE DELIVERY. INSPECT THE ITEM FOR DAMAGE BEFORE SIGNING FOR ACCEPTANCE.
PLEASE NOTE: LID IS SOLD SEPARATELY.
More Information that may be helpful
For older models, the 300 and 310 contained 40 liters of K1 in the Eazy, and 30 liters for the 200 and 210.
Dont change the amount of media in the Eazy as this affects particle capture, and ease of cleaning. The amount of media in the outer chamber can be increased however by up to 150 liters in total in the 220 and 300 liters in the 320 models.
Only increase the amount of media in the outer chambers for heavy stocking and heavy feeding. Note that if the total volume of media is increased in a newly set up filter it will take longer to mature, as there is more surface area for bacteria to colonize and the biofilm will be more thinly spread.
Related Products
nexus220 Owner’s Manual
nexus320 Owner’s Manual
Airtech Air Pumps
Optional Covers/Lids
nexus Automatic Upgrade
Replacement Nexus Parts
Cost: | $25 |
Free Shipping | We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout. |
Delivery Time: | It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances. |
Reviews
There are no reviews yet.