Aqua One Moray Submersible Pump

Aqua One Moray Submersible Pump

Aqua One Moray Aquarium Pumps provide water circulation and aeration in freshwater and salt water aquariums. The latest range of Moray pumps are energy efficient, quiet, reliable and are available in a range of sizes to suit various aquatic environments

Features:
Fully submersible
Oil free motor ensures no toxic chemicals are released into the aquarium
Multi-purpose, can also be used for running devices such as protein skimmers, fountains, waterfalls and ponds
Easily taken apart for cleaning
Very quiet operation
Reliable and efficient
All materials are salt water resistant

Help to work out the size of pump you need due to the head height:

here are two areas to consider for head height, you add these two distances together Vertical lift & Dynamic head.

TO CALCULATE VERTICAL LIFT.

Measure the vertical distance from the surface of the pond water, to the point at which the water enters the top of the watercourse.

TO CALCULATE TOTAL DYNAMIC HEAD.

Other information required to calculate the Total Dynamic Head (TDH) includes the length and diameter of the pipe leading from the pump to the outlet at the top of the watercourse.

For every 1m of pipe is equivalent to 10cm of head height.
For every 1 size hose diameter reduced from the maximum outlet diameter of the pump is equivalent to 1m of head height.
For every 90 degree bend in the hose is equivalent to 1m head height.
For every 45 degree bend in the hose is equivalent to 50cm of head height.

Replacement Parts/Media:

• 25010i Impeller Set 10i – Moray 360 & 480
• 25010i Impeller Set 10i – Moray 360 & 480
• 25012i Impeller Set 12i – Moray 1300
• 25014i Impeller Set 14i – Moray 2300
• 25017i Impeller Set 17i – Moray 3600
• 25017I-N Impeller Set 17i-n – Moray 3600
• 25018I Impeller Set 18i – Moray 4900
• 25018I-N Impeller Set 18i-n – Moray 4900
• 25012S Sponge 2pk 12s – Moray 1300
• 25013S Sponge 2pk 13s – Moray 1800
• 25017S Sponge 1pk 17s – Moray 3600 & 4900

Notes, Hints & Tips

• Please refer to the instruction manual provided with the product for installation and maintenance requirements. If the pumps arebeing used in salt water, they must be checked regularly for build-up of calcium and other deposits.
• To maximise the life of your pump, it is recommended to clean the pump casing and the impeller every 6 – 8 weeks or earlier ifflow has decreased significantly.
• Prior to cleaning, disconnect the pump from the electrical power supply.
  The casing of the pump and the strainer can be cleaned with a firm brush.
  DO NOT USE DETERGENTS AS THE USE OF THESE WILL BE POTENTIALLY LETHAL TO AQUARIUM INHABITANTS.

Warnings & Disclaimers:

• To guard against injury, basic safety precautions should be observed as outlined in the inst